Forces & motion

Why does a paper helicopter spin as it falls?

All it takes is two folded blades. As the paper falls, air pushes on them and sets it spinning.

A helicopter made of paper
A helicopter made of paper · AI-generated illustrative image
✦ The short answer

Gravity pulls the paper helicopter down. As it falls, air flows upwards past its blades and pushes sideways on the tilted paper. The two sideways pushes work together to set it spinning.

Let go of a paper helicopter. It drops a little, then starts to spin. You can even choose which way it turns, just by changing how you fold the two blades.

Air pushes up as the paper falls

Gravity pulls the paper down. From the falling paper’s point of view, the air is flowing upwards. You can feel something similar when you move your hand through still air.

Air pushes against the two paper blades and bends them up a little as the helicopter falls. This push slows the fall and leaves the blades slightly tilted.

The slit divides the wide end into two blades. Fold them in opposite directions. The paper clip goes at the bottom of the stem.
The slit divides the wide end into two blades. Fold them in opposite directions. The paper clip goes at the bottom of the stem.

Air pushes the blades sideways

The air also pushes each tilted blade a little to the side. Because the blades stick out on opposite sides, their sideways pushes point in opposite directions.

Imagine pushing the top of a wheel to the right and the bottom to the left. Both pushes turn the wheel the same way. The two blades work together in the same way. The whole piece of paper spins around its narrow stem.

The blue arrows show just the sideways part of the pushes. Because they act on opposite sides, both turn the paper the same way.
The blue arrows show just the sideways part of the pushes. Because they act on opposite sides, both turn the paper the same way.

The folds decide which way it spins

Fold both blades the other way and their sideways pushes reverse. The paper helicopter then spins the opposite way as it falls. Look from above each time you compare the direction of spin.

↗ Try it yourself

Make a paper helicopter and reverse its folds

  1. Cut a strip of paper about 5 by 15 centimetres. Cut down the middle from the top edge for about 6 centimetres. Trim both sides of the part below the slit, leaving a central stem about 2 centimetres wide.
  2. At the bottom of the slit, fold one blade forwards and the other backwards. Put a small paper clip at the bottom of the stem. Let go of the model from shoulder height and watch from above. Try it a few times.
  3. Reverse the two folds. The blade that pointed forwards now points backwards, and the other points forwards. Drop the model from the same height. Does it spin the other way?

Ask for help with the scissors if you are still learning to use them. Let go of the paper while standing safely on the floor.

The takeaway

As the paper falls, air pushes on the tilted blades. Sideways pushes on opposite sides turn the paper. Reversing the folds reverses the spin.

A little question for you

What happens if you fold both blades the other way?

Sources & further reading

Science World · Why do Helicopters Spin? ↗Exploratorium · Roto-Copter ↗Ontario Science Centre · Make a Twirling Paper Fish and Helicopter ↗

Our stories explain the main idea in our own words. Pictures and models simplify reality and are not drawn to scale.

Copy link

Select and copy this address: