Forces & motion

Why does the bubble in a spirit level sit in the middle?

The bubble floats to the highest point inside the tube. Where it stops tells you whether the surface beneath the tool is tilted.

A yellow spirit level with one bubble between two dark marks
A yellow spirit level with one bubble between two dark marks · AI-generated illustrative image
✦ The short answer

A gas bubble floats in the liquid inside the clear tube. The inside roof of the tube curves up slightly. When the tool is level, the middle is the highest point, so that’s where the bubble settles.

A board looks flat. You set a spirit level on it and watch the little bubble drift to the right. Raise the left end of the board slightly and the bubble moves back. What makes it move?

The liquid pushes the bubble up

The clear tube is called a vial. It is sealed and almost completely filled with liquid, with just enough room for a small gas bubble.

Gravity pulls the liquid down. The pressure in the liquid is slightly higher farther down. So the liquid pushes harder on the bubble from below than from above. That gives the bubble an upward push called buoyancy.

The curve is exaggerated. The bubble sits at its highest point, between the two marks.
The curve is exaggerated. The bubble sits at its highest point, between the two marks.

On a level surface, the highest point is in the middle

The inside roof of the vial is slightly curved. Think of a very shallow arch. When the tool is level, the top of that arch is in the middle.

The bubble rises against the roof and moves to its highest point. The two marks show where the bubble should sit when the surface is level.

The entire vial tilts. Its highest point is now to the right of the centre, under the tip of the blue arrow.
The entire vial tilts. Its highest point is now to the right of the centre, under the tip of the blue arrow.

Tilting the tool moves the highest point

Raise the right end of the tool slightly and the whole vial tilts with it. Now the highest part of the arch is farther to the right. The bubble follows it.

The tool checks the slope along its long edge. To check a tabletop, for example, take one reading from side to side and another from front to back.

↗ Try it yourself

Watch what happens when you tilt the level

  1. Lay a small, light board flat on a sturdy table. Set a spirit level on it and wait until the bubble stops moving. Note where it sits.
  2. Slide a piece of folded card under the right end of the board. Wait for the bubble to settle again. Which way has it moved?
  3. Take the card out and slide it under the left end. Compare the bubble’s new position with its starting position. What happens when the board rests flat on the table again?

Keep the board on the table and leave the sealed vial closed.

The takeaway

Buoyancy moves the bubble to the highest part of the vial. When the tool is level, that point is in the middle. When the tool tilts, the bubble moves towards the raised end.

A little question for you

Which way does the bubble move if you lift the right end slightly?

Sources & further reading

University of Malta · Science Museum: Spirit Level ↗OpenStax, Rice University · Archimedes’ Principle and Buoyancy ↗STABILA · How to check your spirit level ↗

Our stories explain the main idea in our own words. Pictures and models simplify reality and are not drawn to scale.

Copy link

Select and copy this address: